BEST POE SWITCH FOR IP CAMERA

We did a good research and found the Best POE SWITCH FOR IP CAMERA which you can buy for you. You don’t need to do anything else apart from checking out top 10 POE SWITCH FOR IP CAMERA list which is below.

10 BEST POE SWITCH FOR IP CAMERA

IMAGEPRODUCTRATINGPRICE
1. IPCamPower 24 Port POE Network Switch W/ 2 Gigabit Uplink Ports | Designed...
2. BV-Tech 9 Port PoE+ Switch (8 PoE+ Ports | 1 Uplink Port) – 120W – 802.3af/at
3. 8 Port PoE Switch for IP Cameras with 2 Uplink Ports,Unmanaged Power Over...
4. BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) –...
5. IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed...
6. IPCamPower POE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range...
7. Amcrest 9-Port POE+ Power Over Ethernet POE Switch with Metal Housing,...
8. TRENDnet 5-Port Gigabit PoE+ Switch, TPE-TG50g, 31 W PoE Budget, 10 Gbps...
9. MokerLink 16 Port PoE Switch with 2 Gigabit Uplink Ethernet Port, 250W High...
10. PoE Switch (8 POE Ports +2 Uplink),802.3af/at PoE+ 100Mbps, 120W Built-in...
Last updated on October 26, 2020 10:54 am

Best POE SWITCH FOR IP CAMERA

IPCamPower 24 Port POE Network Switch W/ 2 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 250 Watts Total Budget

 in stock
1 new from $169.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 24 POE PORTS W/ 2 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
  • EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
  • TOTAL POE WATTAGE BUDGET OF 250 WATTS - This is normally more than enough wattage to push atleast 24 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 250 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
  • FANLESS QUIET DESIGN & SMALL FOOTPRINT - Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
  • RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

BV-Tech 9 Port PoE+ Switch (8 PoE+ Ports | 1 Uplink Port) – 120W – 802.3af/at

 in stock
1 new from $65.99
5 used from $55.74
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 8 PoE+ Ports at 10/100Mbps
  • 1 Ethernet Uplink Port at 10/100Mbps
  • 120W Max Power - up to 30W per port
  • Auto-MDI/MDI-X | IEEE 802.3af/at
  • Compact Design with Internal Power Supply

8 Port PoE Switch for IP Cameras with 2 Uplink Ports,Unmanaged Power Over Ethernet Switch 10/100Mbps 125W Support IEEE802.3af/at

 in stock
1 new from $29.99
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 8 Port PoE Switch:8 x 10/100 Mb per seconds PoE ports for Security IP Camera Connection & 2 x 10/100Mbps fast Ethernet Uplink ports for Router/NVR connection, Plug & Play
  • This unmanaged 8 PoE ports switch support IEEE802.3AF/AT Network protocol standard, easy set up with no configuration needed, Power & Data Transmission Up To 820 ft / 250m(extend active) without data packet lost
  • Each port supports auto MDI/MDIX and auto negotiation.Store and forwarding, support port isolation.
  • Support IEEE802.3af/at standards, can provide 15.4W/30W per port.
  • Automatic detection and recognition PD device which in accordance with IEEE 802.3af/at and power supply for the device.

BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) – 96W – 802.3af/at| POE-SW811

 in stock
1 new from $69.99
1 used from $49.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 8 PoE+ Ports at 10/100Mbps each, 2 Uplink ports at 10/100/1000Mbps each
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-8 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port.
  • 96W Max Total Power
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support

IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget

 out of stock
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 48 POE PORTS W/ 3 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 51 Port switch in total. (48) 10/100 POE Rated Ports Designed for your IP Cameras or other POE Devices. (3) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
  • 3 TOTAL COMBINED GIGABIT 10/100/1000 UPLINKS - Uplink Port 1 is an Ethernet Port. Uplink Ports 2 & 3 are Ethernet/SFP FIber Combo Ports meaning you can choose to use either the Ethernet port or the Fiber Port for each of these uplinks. Note you can only use 3 uplink ports at one time.
  • TOTAL POE WATTAGE BUDGET OF 400 WATTS - This is normally more than enough wattage to push atleast 48 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 400 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
  • EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
  • RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well. Dimensions are 17.25" x 11.5" x 1.75"

IPCamPower POE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range Extender Passthrough Repeater for IP Cameras

 in stock
1 new from $49.99
2 used from $37.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • Can Serve 2 Purposes (or both at the same time): #1) Can be used as a POE powered 2 Port POE switch #2) Can be used to extend your network cable run past the normal 300 meter distance limitation
  • POE powered 2 Port switch: Has 1 port in and 2 ports out. Takes incoming POE through the in port and will act as a 2 port unmanaged POE switch through the 2 out ports to 2 more networkable devices.
  • POE and/or Network Range Extender: Allows you to run cable lengths past the tradition 300 feet restriction. Daisy chain up to 2 extenders to run upwards to 900 feet
  • Requires no local power, you dont need a power source nearby the extender as its simply powered from the incoming POE power from your POE switch or injector at the beginning of the cable run. (POE injector/switch is not included)
  • Wall mountable low profile design. only 3.1" x 3" x 1"

Amcrest 9-Port POE+ Power Over Ethernet POE Switch with Metal Housing, 8-Ports POE+ 802.3at 96w (AMPS9E8P-AT-96)

 in stock
2 new from $59.98
1 used from $44.69
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 9-Port POE Desktop 10/100 Power Ethernet Switch with 8-Port POE
  • Supports maximum 30w power to each POE port (POE+ 802.3at)
  • 96w Power available to all POE ports
  • Fast Ethernet POE standard IEEE 802.3at wih Auto-MDIX Auto-Negotiation
  • Plug and Play, Compact desktop size, LED activity indicator lights, 1-Year Warranty

TRENDnet 5-Port Gigabit PoE+ Switch, TPE-TG50g, 31 W PoE Budget, 10 Gbps Switching Capacity, Plug & Play, Ethernet Network Switch, Data & Power through Ethernet to PoE Access Points and IP Cameras, Full & Half Duplex

 in stock
52 new from $52.96
1 used from $54.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • ETHERNET PORT CONFIGURATION: 4 Gigabit PoE+ ports and 1 Gigabit port with LED indicators, provides a 10Gbps switching capacity to support edge network installations.
  • DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations.
  • PoE+ POWER: A 31W PoE power budget supplies up to four Power over Ethernet devices. TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points and IP cameras.
  • PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed.
  • DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex)

MokerLink 16 Port PoE Switch with 2 Gigabit Uplink Ethernet Port, 250W High Power, Support IEEE802.3af/at, Rackmount Unmanaged Plug and Play

 in stock
1 new from $104.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 18 Ports: Includes 16 POE ports(10/100Mbps) and 2 Gigabit UpLink ports(10/100/1000Mbps). The 2 gigabit uplink ports can provide more bandwidth and connect to different devices, such as routers, NVRs, etc.
  • High POE Power: Maximum support 250W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*
  • Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration.
  • Extend function: When turn on the extend mode, the POE port can be extended to 250 meter distances and 10Mbps speed, the traffic are isolated from each other,improve the phenomenon of discontinuity and mosaic in surveillance networks, and can improve port bandwidth utilization.
  • Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Industrial fans ensure good heat dissipation. Widely used in scenarios such as HD IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty.

PoE Switch (8 POE Ports +2 Uplink),802.3af/at PoE+ 100Mbps, 120W Built-in Power, Extend to 250Meter,Unmanaged Metal Plug and Play

 in stock
1 new from $31.99
Free shipping
View On Amazon
BEST POE SWITCH FOR IP CAMERA 1 Amazon.com
as of October 26, 2020 10:54 am

Features

  • 【Active poe switch with 802.3af/at compliant】STEAMEMO poe switches support poe devices and non-poe devices, but the switch cannot be directly connected to non-poe devices. You need to add a splitter between them, so please confirm whether your device is a non-poe device before purchasing a poe switch.
  • 【8 port poe switch*[email protected] 】PoE switch with 8 port PoE + 2 Uplink port,8× PoE ports providing up to 30W per port, total PoE budget 120W,2 port uplink ideal for connecting NVR and Internet, etc.
  • 【4KV Lightning Protection】STEAMEMO PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence.
  • 【250 meters Extend function】Turn on the extension switch,Extend function extending max power and data transmission distance from 100 meters(330ft) to 250 meters(820ft).which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras.
  • 【Network cable short-circuit protection mechanism】STEAMEMO POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection.